Plan on roughly $7,100 to $13,100 to repipe a 2-bath New York house in PEX. Two things push that number: the age of the housing stock and what plumbers get paid here. The typical home went up in 1959, older than in any other state, and just over half of the homes, 51.5 %, date from before 1960. Plumbers here make $40.29 an hour, roughly 16 % more than the $34.70 US average. Call now to reach a repipe company serving your area. The call costs you nothing, and the company will give you a fixed price after seeing your house.
How do New York's aging homes affect your pipes?
Houses from before 1960 often carry galvanized steel water pipe, a gray metal pipe that was the standard back then. If your place is that age and nobody has ever swapped the pipes, galvanized steel is probably what's behind low pressure or water that runs brown.
Another 13.4 % of the homes in the state went up between 1980 and 1999. Those years overlap with polybutylene (in use from 1978 to 1995) and Kitec (in use from 1995 to 2007), a pair of plastic pipes you'll want to look for in a house of that vintage.
Just 13.1 % of homes date to 2000 or after. For most New York houses, the original pipes have had plenty of time to give out.
Is a repipe worth it?
Once low pressure, discolored water, or leaks turn up in more than one place, a repipe usually pays off, says Fuse Service. A single leak in a single spot is not the same as trouble breaking out all over the house.
What does repiping cost by house size and pipe type?
The numbers below come from this site's calculator, run with New York's plumber wage. You get a fixed price from the repipe company once it has looked at the house.
| House | About |
|---|---|
| 1 bath, 1,200 sq ft, PEX over a crawl space | $4,600 to $8,600 |
| 2 baths, 1,800 sq ft, PEX over a crawl space | $7,100 to $13,100 |
| Two baths, 1,800 sq ft, CPVC | $8,200 to $14,200 |
| Two baths, 1,800 sq ft, copper | $10,500 to $20,900 |
| Two baths, 1,800 sq ft, PEX, slab | $9,300 to $18,100 |
| 3 baths, 2,400 sq ft, two-story, PEX | $9,000 to $17,900 |
PEX pipe is a bendable plastic, red for hot lines and blue for cold. CPVC comes as stiff cream or tan plastic. Copper is a metal pipe that gets joined with solder.
A crawl space is that low open spot beneath a raised floor. A slab means concrete poured right on the ground, with the pipes running under it or inside it. A national guide from Geek Powered Studios says a slab can add 25 to 50% to the labor.
Roughly 70 % of what you pay goes to labor, and that's why the higher New York wage lifts the whole total. That same national guide reports quotes for the same job can swing by $2,000 to $5,000, which makes a set price after a visit worth having.
Extra costs to ask about
Find out if the quote covers the final inspection, the permit, and patching the walls. A national guide from Geek Powered Studios puts permit fees at $50 to $800.
Do you stay home during the work?
Most families remain in the house while the repipe is underway, according to Repipe Solutions. Expect 2 to 3 days for a 2-bath PEX house over a crawl space.
Checking a plumber's license
Licensing in New York happens at the local level: your city or county handles plumbers, and within New York City the Department of Buildings is in charge of master plumbers. Before work starts, check the license with your local building department.
House plumbing: New York's Uniform Code
New York's statewide code has its own names. For a house, the rules come from the 2025 Residential Code of New York State. For other buildings, the rules come from the 2025 Plumbing Code of New York State. Both are published by the International Code Council, a national code group. New York City keeps its own New York City Plumbing Code. Everywhere else, the code is enforced by your city, town, village or county. State rules say each local office must require a building permit for work under the code. Some repairs are among the few jobs the office may exempt.
Roughly 12.6 percent of New Yorkers get their water from a private well instead of city water. Nationwide, the share is about 15 percent.
How to tell which pipe you have
This site's pipe identifier can name eight pipe types just from how they look and touch: galvanized steel, copper, PEX, CPVC, polybutylene, Kitec, cast iron, plus Orangeburg. Once you know which one you have, it's easier to describe your house when you call.
Call today. It costs you nothing, a repipe company in your area comes to see your house, and you get a fixed price.
